We’re excited to announce that part number 417408 is now available in our ready-to-ship inventory. Part number 417408 is a Generator Engine Ac manufactured by White Motor Corp. Are you interested in a quick and competitive quote for this part? If so, just fill out the short Request for Quote (RFQ) form below to get started.
As you fill out the RFQ form, make sure that you carefully complete all fields, especially the asterisk-marked (*) fields like Need Parts By and Quantity (ea). A majority of your quote will be determined by your response to these fields. One of our dedicated sales representatives will get back to you with your quote in 15 minutes or less after receiving your RFQ.
ASAP NSN Parts, owned and operated by ASAP Semiconductor, is a leading distributor of White Motor Corp hard-to-find parts for the aerospace, aviation, and defense industries. We’re an AS9120B, ISO 9001:2015, and FAA AC 0056B accredited member of the Aviation Suppliers Association (ASA). With our vast and comprehensive inventory of over 2 billion parts sourced from over 5000 global manufacturers and our many advanced shipping facilities, we can get you the parts you need at the fastest delivery times in the industry with same-day and next-day delivery.
Is 15 minutes still too long to wait for a quote? If so, you can call us at our toll-free number, +1-714-705-4780, or email us your Bill of Materials (BOM) at email@example.com. We’re available and ready to help, 24/7x365. And for an even faster and more convenient purchasing experience, you can download the ASAP Semiconductor App from Google Play or the App Store.
|AASA||THREAD LENGTH||0.844 INCHES NOMINAL|
|AAUJ||SPLINE MAJOR DIAMETER||0.874 INCHES NOMINAL|
|AAUK||SPLINE WIDTH||0.216 INCHES MINIMUM AND 0.217 INCHES MAXIMUM|
|ADER||MOUNTING STYLE||BRACKET MTD W/THREE MTG HOLES|
|ADZC||ENVIRONMENTAL PROTECTION||CORROSION RESISTANT AND FUNGUS RESISTANT|
|AKCT||SHAFT ROTATION DIRECTION||CLOCKWISE|
|AWDP||THREAD DIAMETER||0.625 INCHES NOMINAL|
|AXFH||SPLINE LENGTH||2.000 INCHES NOMINAL|
|BCGD||ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT||900|
|BCGF||III MAXIMUM OUTPUT CURRENT RATING IN AMPS||55.0|
|BCGG||MINIMUM CURRENT CUT-IN SPEED IN RPM||580|
|BCGS||SHAFT DRIVE END STYLE||SPLINED SHAFT END, THREADED|
|BCLY||DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER||4.500 INCHES NOMINAL|
|BCLZ||DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER||4.875 INCHES NOMINAL|
|BCMB||ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG||170.0|
|BCMC||ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG||190.0|
|BCMD||DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET||4.250 INCHES NOMINAL|
|BCMF||DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET||5.370 INCHES MINIMUM AND 5.380 INCHES MAXIMUM|
|BCMG||TOP MOUNTING HOLE DIAMETER||0.531 INCHES NOMINAL|
|BCMH||BOTTOM MOUNTING HOLE DIAMETER||0.627 INCHES MINIMUM AND 0.629 INCHES MAXIMUM|
|BCND||MAXIMUM RATED ARMATURE SPEED IN RPM||3600|
|CMLP||THREAD QUANTITY PER INCH||18|
|ELEC||VOLTAGE IN VOLTS||12.0|
Don’t forget That You Can Always Get an Instant RFQ Within Fifteen Minutes Or Less. All You Need to Do Is Fill Out the form On Our Home Page, and You Can Get Started today.Request for Quote