| MRC | Criteria | Characteristic |
|---|
| AAJT | OVERALL HEIGHT | 2.812 INCHES |
| AAJU | OVERALL LENGTH | 4.560 INCHES |
| AAJV | OVERALL WIDTH | 2.375 INCHES |
| AASA | THREAD LENGTH | 0.145 INCHES MINIMUM FIRST END AND 0.155 INCHES MAXIMUM FIRST END |
| ABND | TAPER LENGTH | 0.179 INCHES MINIMUM FIRST END AND 0.189 INCHES MAXIMUM FIRST END |
| ABWV | SHAFT DIAMETER | 0.145 INCHES MINIMUM FIRST END AND 0.155 INCHES MAXIMUM FIRST END |
| ABXQ | FLATTED PORTION LENGTH | 0.7500 INCHES NOMINAL SECOND END |
| ACDC | CURRENT TYPE | AC INPUT |
| AGRB | FLAT DEPTH | 0.0900 INCHES NOMINAL SECOND END |
| ANPZ | INCLOSURE FEATURE | TOTALLY INCLOSED |
| AXGY | MOUNTING METHOD | PAD |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 8 UNTHREADED HOLE |
| BFMF | COOLING METHOD | NONVENTILATED |
| BFMJ | CONTROL FIELD CURRENT RATING IN AMPS | 0.070 |
| BFMK | CONTROL FIELD IMPEDANCE RATING IN OHMS | 3600.0 |
| BFML | CONTROL FIELD WINDING TYPE | SINGLE WINDING W/CENTER TAP |
| BKPB | CURRENT RATING METHOD | NO LOAD |
| BKPH | TORQUE RATING AND TYPE | 5.0 INCH-OUNCES STALLED |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| BKPS | CONTROL FIELD VOLTAGE TYPE AND RATING IN VOLTS | 250.0 AC |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| CQJX | NOMINAL THREAD SIZE | 0.112 INCHES FIRST END |
| CQRR | TAPER | 7.500 PER FOOT IN INCHES FIRST END |
| CWCS | LENGTH OF SHAFT FROM HOUSING | 0.334 INCHES FIRST END |
| CWCS | LENGTH OF SHAFT FROM HOUSING | 1.070 INCHES SECOND END |
| CWDY | TEMP RATING | 65.0 AMBIENT DEG CELSIUS AND-55.0 OPERATING DEG CELSIUS AND 55.0 OPERATING DEG CELSIUS |
| CWFX | ROTOR SPEED RATING IN RPM | 3450.0 SINGLE NO LOAD |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.918 INCHES |
| CWGD | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 1.500 INCHES |
| CWGL | CURRENT RATING IN AMPS | 0.130 SINGLE INPUT |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 130.0 LINE TO NEUTRAL SINGLE INPUT |
| CWHZ | SHAFT END CHARACTERISTIC | A2 FIRST STYLE FIRST END AND A4 SECOND STYLE FIRST END |
| CWHZ | SHAFT END CHARACTERISTIC | A5 SINGLE STYLE SECOND END |
| FAAZ | PHASE | SINGLE INPUT |
| FEAT | SPECIAL FEATURES | SHAFT FIRST END SECOND STYLE 0.157 IN. DIA; SHAFT SECOND END SINGLE STYLE 0.156 IN. DIA |
| FREQ | FREQUENCY IN HERTZ | 60.0 INPUT |
| THSD | THREAD SERIES DESIGNATOR | UNF FIRST END |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
