| MRC | Criteria | Characteristic |
|---|
| CRHD | TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS | -25.0 TO 25.0 SINGLE SECTION |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| FEAT | SPECIAL FEATURES | WEAPON SYSTEM ESSENTIAL |
| AAQL | BODY STYLE | W/O MTG FACILITIES,TERMINALS ON OPPOSITE SURFACES |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | 1.125 INCHES MINIMUM |
| ADAQ | BODY LENGTH | 0.563 INCHES NOMINAL |
| ADAT | BODY WIDTH | 0.266 INCHES NOMINAL |
| ADAU | BODY HEIGHT | 0.219 INCHES NOMINAL |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) |
| AGAV | END ITEM IDENTIFICATION | RADIO TRANSMITTER SET,AN/URT-23 (RTS); RADIO SET (A1815)(AN/GRC-193); SPRUANCE CLASS DD (963); LOS ANGELES CLASS SSN (688); KIDD CLASS DDG; RADIO SET (AN/MRC-138); TICONDEROGA CLASS CG (47); STURGEON CLASS SSN (637); AIRBORN MOBILE DIR AIR |
| CQBQ | CAPACITANCE VALUE PER SECTION | 330.000 PICOFARADS SINGLE SECTION |
| CQJJ | NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM |
| CQLZ | TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | 105.0 SINGLE SECTION |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 500.0 DC SINGLE SECTION |
| CRTP | TOLERANCE RANGE PER SECTION | -5.00 TO 5.00 PERCENT SINGLE SECTION |
| CWJK | CASE MATERIAL | GLASS |
| CWPM | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 0.0010 |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| TEST | TEST DATA DOCUMENT | 14304-C50-0001-037 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING |
| TTQY | TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
