| MRC | Criteria | Characteristic |
|---|
| AAPN | SECTION QUANTITY | 4 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 1.3125 INCHES MAXIMUM |
| AAVM | PILOT LENGTH | 0.0620 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 3.250 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 1.313 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0730 INCHES MINIMUM |
| ABPM | BODY DIAMETER | 1.440 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.2497 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.680 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 2.300 INCHES MAXIMUM |
| ADAV | OVERALL DIAMETER | 1.880 INCHES MAXIMUM |
| AECZ | MOUNTING LIP DIAMETER | 1.4370 INCHES NOMINAL |
| AEDA | MOUNTING LIP DEPTH | 0.0930 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AEDZ | SHAFT BEARING TYPE | BALL |
| AEFD | ACTUATOR TYPE | DOUBLE ENDED SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 345.0 NOMINAL |
| AEFK | MAXIMUM STARTING TORQUE | 3.25 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 3.00 INCH-OUNCES |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | CLAMP RING |
| CBME | CUBIC MEASURE | 3.745 CUBIC INCHES |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.000 KILOHMS 1ST SECTION AND 10.000 KILOHMS 2ND SECTION AND 20.000 KILOHMS 3RD SECTION AND 20.000 KILOHMS 4TH SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.15 TO 0.15 1ST SECTION AND-0.30 TO 0.30 2ND SECTION AND-0.50 TO 0.50 3RD SECTION AND-0.50 TO 0.50 4TH SECTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 ALL SECTIONS |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR ALL SECTIONS |
| CRGM | FUNCTION CONFORMITY PER SECTION | 1ST SECTION ABSOLUTE LINEARITY AND 2ND SECTION ABSOLUTE LINEARITY AND 3RD SECTION ABSOLUTE LINEARITY AND 4TH SECTION ABSOLUTE CONFORMITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 ALL SECTIONS |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | 1ST SECTION LINEAR AND 2ND SECTION LINEAR AND 3RD SECTION LINEAR AND 4TH SECTION GRAPH |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 ALL SECTIONS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 ALL SECTIONS |
| FEAT | SPECIAL FEATURES | REAR SLOTTED SHAFT,SHAFT LENGTH 0.250 INCHES MAXIMUM,SHAFT DIAMETER 0.3125 INCHES MAXIMUM |
| TEST | TEST DATA DOCUMENT | 10001-2996543 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |
| TTQY | TERMINAL TYPE AND QUANTITY | 12 TURRET |
