| MRC | Criteria | Characteristic |
|---|
| AAJD | THREAD CLASS | 2B 1ST END |
| ABKU | FLANGE THICKNESS | 0.315 INCHES NOMINAL 2ND END |
| ABKV | OUTSIDE DIAMETER | 1.230 INCHES NOMINAL |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 9.500 INCHES |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 0.960 INCHES NOMINAL 2ND END |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| AHNX | BOLT HOLE DIAMETER | 0.406 INCHES NOMINAL 2ND END |
| AKUT | END FLANGE CONSTRUCTION | SOLID 2ND END |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| AKXL | END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| AWLS | CONNECTION TYPE | PLAIN FACE FLANGE 2ND END |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER SPIRALLY LAID STEEL WIRE AND 1ST LAYER SPIRALLY LAID STEEL WIRE 2ND LAYER SPIRALLY LAID STEEL WIRE AND 3RD LAYER SPIRALLY LAID STEEL WIRE AND 4TH LAYER SPIRALLY LAID STEEL WIRE AND OUTER LAYER MOLDED RUBBER,SYNTHETIC |
| CQCS | LAYER COMPOSITION AND LOCATION | 2ND LAYER SPIRALLY LAID STEEL WIRE |
| CQCS | LAYER COMPOSITION AND LOCATION | 3RD LAYER SPIRALLY LAID STEEL WIRE |
| CQJX | NOMINAL THREAD SIZE | 1.062 INCHES 1ST END |
| CRDW | HYDROSTATIC TEST PRESSURE | 6000.0 POUNDS PER SQUARE INCH |
| CRFY | FLOW ANGLE | 90.0 DEGREES 2ND END |
| CRXX | MEASURING METHOD AND LENGTH | 30.000 INCHES NOMINAL OVERALL |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL,HYDROCARBON SINGLE RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | UN 1ST END |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 212.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.062 INCHES NOMINAL 2ND END |
| AECS | BOLT HOLE QUANTITY | 4 2ND END |
| AFQN | FLANGE LENGTH | 2.720 INCHES MINIMUM AND 2.780 INCHES MAXIMUM 2ND END |
| AGAV | END ITEM IDENTIFICATION | 3810-01-268-1737,HARNISCHFEGER CRANE,TRUCK MOUNTED |
| AHNC | CONNECTION STYLE | PLAIN 2ND END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CQBD | BURST TEST PRESSURE | 12000.0 POUNDS PER SQUARE INCH |
| CQCS | LAYER COMPOSITION AND LOCATION | 4TH LAYER SPIRALLY LAID STEEL WIRE |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER MOLDED RUBBER,SYNTHETIC |
| CQGM | MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER,SYNTHETIC |
| ZZZK | SPECIFICATION/STANDARD DATA | SAE J517,100R9A-81343 NATIONAL STD/SPEC |
| AARX | INSIDE DIAMETER | 0.750 INCHES NOMINAL |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| CTCJ | FLANGE STYLE | DOUBLE OVAL (SAE SPLIT TYPE FLANGE) 2ND END |
| AGFF | FLANGE WIDTH | 2.220 INCHES NOMINAL 2ND END |
| CMLP | THREAD QUANTITY PER INCH | 12 1ST END |
