| MRC | Criteria | Characteristic |
|---|
| AAQL | BODY STYLE | STANDARD ROUND B |
| AAVH | SHOULDER DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 2.3560 INCHES NOMINAL |
| ABKK | FLANGE DIAMETER | 1.0570 INCHES MINIMUM AND 1.0620 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0500 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.1867 INCHES MINIMUM AND 0.1872 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.5000 INCHES NOMINAL SINGLE SHAFT |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AHCG | MAXIMUM TEMP RISE | 20.0 DEG CELSIUS |
| AJSL | BODY SIZE | 11 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | 114.0 MINIMUM AND 116.0 MAXIMUM |
| AJSS | FREQUENCY IN HERTZ | 396.0 MINIMUM AND 404.0 MAXIMUM |
| AJST | ROTOR INPUT CURRENT RATING | 31.0 MILLIAMPERES NOMINAL |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | 490.0 MILLIWATTS NOMINAL |
| AJTG | ZRO IMPEDANCE MAGNITUDE IN OHMS | 3720.00 MINIMUM AND 4700.00 MAXIMUM |
| AJTH | ZRO IMPEDANCE ANGLE IN DEG | 80.00 MINIMUM AND 84.00 MAXIMUM |
| AJTN | ZSS IMPEDANCE MAGNITUDE IN OHMS | 410.00 MINIMUM AND 500.00 MAXIMUM |
| AJTP | ZSS IMPEDANCE ANGLE IN DEG | 17.00 MINIMUM AND 26.00 MAXIMUM |
| AJVF | PHASE SHIFT ANGLE IN DEG | 3.000 INPUT TO OUTPUT MINIMUM AND 6.000 INPUT TO OUTPUT MAXIMUM |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 45.00 OUTPUT |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 75.00 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 0.07 INCH-OUNCES NOMINAL |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWQ | PILOT LENGTH | 0.0620 INCHES NOMINAL |
| AJWR | SHOULDER LENGTH | 0.0620 INCHES NOMINAL |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.7320 INCHES NOMINAL |
| CQTM | TERMINAL LOCATION | REAR |
| CRSJ | SHAFT TYPE | ROUND SINGLE SHAFT |
| CRSY | ALIGNMENT HOLE DEPTH | 0.1250 INCHES NOMINAL |
| CSJY | TRANSFORMATION RATIO | 0.783 STATOR TO ROTOR NOMINAL |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.8090 INCHES MINIMUM AND 0.8150 INCHES MAXIMUM |
| TEST | TEST DATA DOCUMENT | 18876-10181799 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 SCREW |
