| MRC | Criteria | Characteristic |
|---|
| AAQL | BODY STYLE | RIGHT ANGLE TYPE |
| ABHP | OVERALL LENGTH | 3.438 INCHES MINIMUM AND 3.448 INCHES MAXIMUM |
| ABKW | OVERALL HEIGHT | 0.661 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 0.210 INCHES MINIMUM AND 0.220 INCHES MAXIMUM |
| ADZC | ENVIRONMENTAL PROTECTION | MOISTURE RESISTANT AND SALT WATER RESISTANT AND VIBRATION RESISTANT |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | 0.055 INCHES NOMINAL |
| AEJN | DISTANCE BETWEEN MOUNTING FACILITY CENTERS | 2.900 INCHES NOMINAL |
| AFQW | MATING END QUANTITY | 1 |
| AFQX | CONTACT POSITION ARRANGEMENT STYLE | 2 ROWS OF CONTACTS NON-INSERTED BOARD SINGLE MATING END |
| AFQZ | CONTACT REMOVABILITY | REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| AFRN | POLARIZATION METHOD | FIXED INTER-CONTACT |
| AFRT | SHELL TYPE | SOLID |
| CQTM | TERMINAL LOCATION | SIDE SINGLE MATING END SINGLE CONTACT GROUPING |
| CQTZ | CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| CQYH | CONTACT SURFACE TREATMENT | GOLD AND NICKEL SINGLE MATING END SINGLE CONTACT GROUPING |
| CQZG | INSERT MATERIAL | PLASTIC POLYAMIDE SINGLE MATING END |
| CSGF | CONTACT MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-B-613 FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CSPT | SHELL MATERIAL | ALUMINUM |
| CSWM | SHELL SURFACE TREATMENT | OXIDE FILM |
| CTBC | SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE |
| CTHH | SHELL MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/1 FED SPEC SINGLE MATERIAL RESPONSE |
| CXCG | INCLUDED CONTACT QUANTITY | 53 SINGLE MATING END SINGLE CONTACT GROUPING |
| CXCL | INCLUDED CONTACT TYPE | ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| PMLC | PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD |
| PMWT | PRECIOUS MATERIAL AND WEIGHT | 0.058 GOLD GRAINS,TROY |
| PRMT | PRECIOUS MATERIAL | GOLD |
