| MRC | Criteria | Characteristic |
|---|
| FEAT | SPECIAL FEATURES | SHAFTS OPERATE INDEPENDENTLY OF ONE ANOTHER |
| TEST | TEST DATA DOCUMENT | 18876-10179166 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 TAB,SOLDER LUG |
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | CYLINDRICAL HOLE/SLOT MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | 5.594 INCHES NOMINAL |
| ABNB | FIRST FLAT LENGTH | 0.375 INCHES MINIMUM AND 0.437 INCHES MAXIMUM |
| ABNC | FLAT HEIGHT | 0.212 INCHES MINIMUM AND 0.217 INCHES MAXIMUM |
| ABPM | BODY DIAMETER | 3.000 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.244 INCHES MINIMUM AND 0.255 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 1.594 INCHES MINIMUM AND 1.656 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 2.469 INCHES NOMINAL |
| AEDE | MOUNTING HOLE/STUD CIRCLE DIAMETER | 1.750 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND,FLATTED |
| AEFD | ACTUATOR TYPE | DOUBLE ENDED SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 357.0 MINIMUM |
| AEFK | MAXIMUM STARTING TORQUE | 2.00 INCH-OUNCES |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES |
| AEGA | LATERAL RUNOUT | 0.003 INCHES |
| AEGB | PILOT DIAMETER RUNOUT | 0.10000 INCHES |
| AEGC | SHAFT RADIAL PLAY | 0.003 INCHES |
| AJYN | SCREW THREAD DIAMETER | 0.138 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNC |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 28.0 |
| AKPV | MOUNTING FACILITY QUANTITY | 3 |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | THREADED HOLE |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 20.0 KILOHMS ALL SECTIONS |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.10/0.10 ALL SECTIONS |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -200.0 TO 200.0 ALL SECTIONS |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR ALL SECTIONS |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/10.0 ALL SECTIONS |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 ALL SECTIONS |
