| MRC | Criteria | Characteristic |
|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AAJD | THREAD CLASS | 2B 1ST END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| AARX | INSIDE DIAMETER | 1.250 INCHES NOMINAL |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ABKU | FLANGE THICKNESS | 0.315 INCHES NOMINAL 2ND END |
| ABKV | OUTSIDE DIAMETER | 1.960 INCHES NOMINAL |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 16.500 INCHES |
| ADJS | EXTERIOR COLOR | BROWN |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.035 INCHES NOMINAL 2ND END |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.062 INCHES NOMINAL 2ND END |
| AECS | BOLT HOLE QUANTITY | 4 2ND END |
| AFQN | FLANGE LENGTH | 2.720 INCHES MINIMUM AND 2.780 INCHES MAXIMUM 2ND END |
| AGAV | END ITEM IDENTIFICATION | 2350-01-390-4683 |
| AGFF | FLANGE WIDTH | 2.900 INCHES NOMINAL 2ND END |
| AHNC | CONNECTION STYLE | PLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) 2ND END |
| AHNC | CONNECTION STYLE | SWIVEL NUT, GASKET SEAL 1ST END |
| AHNX | BOLT HOLE DIAMETER | 0.406 INCHES NOMINAL 2ND END |
| AKUT | END FLANGE CONSTRUCTION | SOLID 2ND END |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| AWLS | CONNECTION TYPE | PLAIN FACE FLANGE 2ND END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CMLP | THREAD QUANTITY PER INCH | 12 1ST END |
| CQBD | BURST TEST PRESSURE | 20000.0 POUNDS PER SQUARE INCH |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER SPIRALLY LAID STEEL WIRE AND 2ND LAYER SPIRALLY LAID STEEL WIRE AND 3RD LAYER SPIRALLY LAID STEEL WIRE AND 4TH LAYER SPIRALLY LAID STEEL WIRE AND 5TH LAYER SPIRALLY LAID STEEL WIRE AND 6TH LAYER SPIRALLY LAID STEEL WIRE AND |
| CQGM | MAXIMUM OPERATING PRESSURE | 5000.0 POUNDS PER SQUARE INCH |
| CQJX | NOMINAL THREAD SIZE | 1.688 INCHES 1ST END |
| CRDW | HYDROSTATIC TEST PRESSURE | 10000.0 POUNDS PER SQUARE INCH |
| CRFY | FLOW ANGLE | 45.0 DEGREES 2ND END |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | WEATHERPROOF AND OIL RESISTANT |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | 59.500 INCHES NOMINAL WORKING |
| CTCJ | FLANGE STYLE | DOUBLE OVAL (SAE SPLIT TYPE FLANGE) 2ND END |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON AND HYDRAULIC FLUID, WATER BASE SINGLE RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | UN 1ST END |
