| MRC | Criteria | Characteristic |
|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AARX | INSIDE DIAMETER | 1.125 INCHES NOMINAL |
| ABJH | TEMP RATING | -100.0 DEG FAHRENHEIT AND 275.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ABKV | OUTSIDE DIAMETER | 1.359 INCHES NOMINAL |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 11.000 INCHES |
| ADJS | EXTERIOR COLOR | NATURAL |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 30.0 |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.390 INCHES NOMINAL 1ST END |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.390 INCHES NOMINAL 2ND END |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.390 INCHES NOMINAL 1ST END |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.390 INCHES NOMINAL 2ND END |
| AECS | BOLT HOLE QUANTITY | 4 1ST END |
| AECS | BOLT HOLE QUANTITY | 4 2ND END |
| AFQN | FLANGE LENGTH | 2.208 INCHES MAXIMUM 1ST END |
| AFQN | FLANGE LENGTH | 2.208 INCHES MAXIMUM 2ND END |
| AGFF | FLANGE WIDTH | 2.208 INCHES MAXIMUM 1ST END |
| AGFF | FLANGE WIDTH | 2.208 INCHES MAXIMUM 2ND END |
| AHNC | CONNECTION STYLE | RAISED 1ST END |
| AHNC | CONNECTION STYLE | RAISED 2ND END |
| AHNX | BOLT HOLE DIAMETER | 0.266 INCHES NOMINAL 1ST END |
| AHNX | BOLT HOLE DIAMETER | 0.266 INCHES NOMINAL 2ND END |
| AKUT | END FLANGE CONSTRUCTION | SOLID 1ST END |
| AKUT | END FLANGE CONSTRUCTION | SOLID 2ND END |
| AKUU | END CONNECTION DESIGN | ELBOW 1ST END |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| AWLS | CONNECTION TYPE | RAISED FACE FLANGE 1ST END |
| AWLS | CONNECTION TYPE | RAISED FACE FLANGE 2ND END |
| CQBD | BURST TEST PRESSURE | 4000.0 POUNDS PER SQUARE INCH |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| CQGM | MAXIMUM OPERATING PRESSURE | 1000.0 POUNDS PER SQUARE INCH |
| CRDW | HYDROSTATIC TEST PRESSURE | 2000.0 POUNDS PER SQUARE INCH |
| CRFY | FLOW ANGLE | 45.0 DEGREES 1ST END |
| CRFY | FLOW ANGLE | 90.0 DEGREES 2ND END |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND CORROSION RESISTANT |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | 21.000 INCHES MINIMUM WORKING AND 21.500 INCHES MAXIMUM WORKING |
| CTCJ | FLANGE STYLE | RECTANGULAR (INCLUDES SQUARE) 1ST END |
| CTCJ | FLANGE STYLE | RECTANGULAR (INCLUDES SQUARE) 2ND END |
| MEDA | MEDIA FOR WHICH DESIGNED | FUELS,OILS,ALCOHOLS,SOLVENTS AND WATER SINGLE RESPONSE |
