| MRC | Criteria | Characteristic |
|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AAJD | THREAD CLASS | 3A 1ST END |
| AAJD | THREAD CLASS | 3A 2ND END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 2ND END |
| AARX | INSIDE DIAMETER | 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ABKV | OUTSIDE DIAMETER | 0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 4.000 INCHES |
| ADJS | EXTERIOR COLOR | BLACK OR NATURAL |
| AHNC | CONNECTION STYLE | SWIVEL NUT,INVERTED FLARE 1ST END |
| AHNC | CONNECTION STYLE | SWIVEL NUT,INVERTED FLARE 2ND END |
| AKUU | END CONNECTION DESIGN | ELBOW 1ST END |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| AWLS | CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END |
| AWLS | CONNECTION TYPE | THREADED EXTERNAL TUBE 2ND END |
| CQBD | BURST TEST PRESSURE | 5000.0 POUNDS PER SQUARE INCH |
| CQCS | LAYER COMPOSITION AND LOCATION | 2ND LAYER BRAIDED RAYON CORD AND 1ST LAYER BRAIDED RAYON CORD AND OUTER LAYER MOLDED RUBBER,SYNTHETIC |
| CQGM | MAXIMUM OPERATING PRESSURE | 1250.0 POUNDS PER SQUARE INCH |
| CQJX | NOMINAL THREAD SIZE | 0.625 INCHES 1ST END |
| CQJX | NOMINAL THREAD SIZE | 0.625 INCHES 2ND END |
| CQRB | SEAT ANGLE | 45.0 DEGREES 1ST END |
| CQRB | SEAT ANGLE | 45.0 DEGREES 2ND END |
| CRDW | HYDROSTATIC TEST PRESSURE | 2500.0 POUNDS PER SQUARE INCH |
| CRFY | FLOW ANGLE | 40.0 DEGREES 1ST END |
| CRFY | FLOW ANGLE | 45.0 DEGREES 2ND END |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND OIL RESISTANT AND WEATHERPROOF |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | 32.000 INCHES MINIMUM OVERALL AND 33.500 INCHES MAXIMUM OVERALL |
| MEDA | MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID AND FUEL/OIL,HYDROCARBON SINGLE RESPONSE |
| SPCL | SPECIAL TEST FEATURES | 1ST END CONNECTION DESIGN,PREBENT TUBE 9.500 IN.LG./2ND END CONNECTION DESIGN,PREBENT TUBE 10.500 IN.LG |
| THSD | THREAD SERIES DESIGNATOR | UNF 1ST END |
| THSD | THREAD SERIES DESIGNATOR | UNF 2ND END |
